Diamond Billiard Products Actuator Wire electronically connects the Actuator Motor to the Timer Board within the Diamond Smart Table. This wire is a genuine Diamond OEM replacement.

Looking for a cushion rubber that's fast, accurate, and long-lasting? Look no further than Artemis Intercontinental No. 66! Made in Germany from premium-grade, full gum-rubber, this six-piece set is built to deliver 20-25 years of exceptional gameplay. Unlike extruded rubber, which contains fillers, Artemis rubber is made with only the highest-quality cushion materials.

Measuring 48" per piece, this cushion rubber set is perfect for use on 9' Diamond tables or larger. The control fabric on the top and back ensures consistent play, so you can enjoy precision shots and accurate rebounds every time. It's worth noting that Diamond 7' and 8' tables use Diamond Black Rubber, specially designed for their smaller play surface.

Invest in the best with Artemis Intercontinental No. 66 cushion rubber and experience the ultimate in speed, accuracy, and durability for your billiards game!  

DID YOU KNOW ?

• Diamond utilizes 3/16" Neoprene rubber facing on each end of every Artemis cushion so the pocket plays professionally. Please make sure to add your facings as the pocket cushion won't play correctly if you don't! 
• The factory pocket size of your Diamond table, currently utilizing a 3/16" facing, can be reduced by 1/4" by switching to a 5/16" facing. This adjustment will reduce a pro-cut 4 1/2" pocket to a 4 1/4" size without any rail modification or loss of pocket playability. Diamond Facings
• Diamond 7' and 8' tables use Diamond Black Rubber, specially designed for their smaller playing surface. Diamond Black Rubber

Diamond Billiard Products Timer Board serves as the central component of the state-of-the-art electronic ball drop system in the Diamond Smart Table. This essential circuit board is responsible for managing the power and timing functions that are critical for gameplay. As an authentic OEM replacement part, it ensures seamless performance and reliability.

Diamond Billiard Products Optical Density Sensor is a high-tech component of the Diamond Smart table's ball separation system. It uses laser technology to accurately detect and track the cue ball as it travels through the center of the table. Once detected, the Solenoid Separator is signaled to quickly and accurately separate the cue ball from the other object balls. This cutting-edge technology helps ensure that your games of pool are always fair and accurate.

Diamond Billiard Products Solenoid is an essential component of the Diamond Smart Table, responsible for separating the cue ball from the object balls and allowing it to exit to the head of the table. All object balls pass by the solenoid and proceed to the ball collector. This Solenoid is a genuine OEM replacement part, used in all Diamond Smart Tables.

Diamond Billiard Products "BLUE" Actuator is a high-quality replacement part that is designed to release balls in your Smart Table 2020 to current when the coin mechanism is used. This actuator is a genuine OEM replacement, ensuring that you get the same level of performance and reliability as the original part. With this actuator, you can be confident that your Smart Table will operate smoothly and accurately for years to come.

DID YOU KNOW?

• This Diamond Blue Actuator can be upgraded to arrive factory-mounted on a wooden base with an included plexiglass gate (pictured below). This makes it easy to swap out the mounted actuator through the table's belly door. If you're unsure which option is best, feel free to give us a call! Diamond Actuator Full Assembly
• 

Diamond Billiard Products "Black" Actuator is a genuine OEM replacement for the pre R9 design Smart Tables, and it releases the balls in the table when the coin mechanism is vended. This ball drop actuator is compatible with Smart Tables that have the electronic ball drop system and the wooden teeter totter.

Diamond Billiard Products Cash Box Plywood Lid is designed to cover the cash box and mount various parts for the ball drop system. As a genuine OEM replacement, it guarantees the same quality and performance as the original used at the factory.

Diamond Billiard Products Main Cable Replacement Kit is a comprehensive solution to replace the cable ball drop system on the first generation Smart Table. This kit includes the cable, cable housing, screws, crimps and mounts, making it easy to install and get your table back up and running. It's a genuine OEM replacement for your Diamond Smart Table, ensuring the same level of quality and performance you expect from the brand.

Diamond Billiard Products Crossover is responsible for directing the balls to the ball separator, ensuring smooth and efficient gameplay within the Diamond Smart table. Made from high-quality materials, this OEM replacement part guarantees the same quality and performance as the original. 

Diamond Billiard Products Battery Pack powers the electric components of the Diamond Smart table. This battery pack holds 8 D-cell batteries and is the genuine OEM replacement, ensuring the same level of quality and performance as the original used at the Diamond factory.

Diamond Billiard Products Latch Release internal component is a critical part of the ball drop system and ensures seamless gameplay within the first generation Smart Tables.

Specifically, the latch release locks the teeter when the table is not in use and releases the teeter when the Smart table is vended, providing smooth operation and reliable performance. As a genuine OEM replacement part, you can trust the Diamond Latch Release to be high-quality and durable. 

Diamond Billiard Products Ball Separator Micro Switch, which is responsible for controlling the laser sensor on the cue ball separator in the Diamond Smart table. This laser sensor remains in sleep mode until a ball rolls over the switch, activating the laser that separates the cue ball from the object balls. Ensure your table continues to operate at its best with this genuine OEM replacement part!

Diamond Billiard Products Tension Spring, a genuine OEM replacement part designed for use within the Diamond Smart table. Its primary function is to maintain tension on the release bar, ensuring that it returns to the lock position after the balls have been dropped. By using this high-quality replacement part, you can keep your table functioning at its best for years to come.

Diamond Billiard Products Wire Bridge Holder is an indispensable accessory for your Diamond Smart or Pro-Am table. It is specifically designed to attach to the belly of your table, keeping your bridge stick readily available for every shot. The holder is coated with clear rubber, ensuring quiet placement and protecting your bridge from nicks and scratches.

Easy to install, the mount is located under the belly of the table, ensuring that it won't damage the ball return box, and leaving your table looking as good as new. The Bridge Holder is placed away from the walking area, so it won't interfere with your game, and is available as a single holder or as a set of two for convenient placement on both sides of the table.

Designed by Diamond, this genuine OEM bridge holder is a must-have for serious players looking to elevate their gameplay. Don't let a misplaced bridge stick ruin your shot- keep it within arm's reach with the Diamond Wire Bridge Holder.

Diamond Billiard Products R9 Smart Table Replacement Rear Coin Mech Bracket is designed to work with the Dual Anti Cheat Per Game Switch System. This bracket is a genuine OEM replacement for the rear coin mechanism on your R9 Diamond Smart Table.

IMPORTANT:

There are two bracket types available, depending on the placement of the coin mechanism on your Diamond Smart Table coin door.

Factory standard for 7' and 8' Diamond Smart Tables includes a single coin mechanism on the right side of the coin door (per-play use) and requires a right-side R9 bracket.

9' Diamond Smart Tables include two mechanisms — the right side for per-play use and the left side for a 30-minute timer — and require both brackets as they are not identical.

Please be sure to select the right-side bracket for per-play use and the left-side bracket for the 30-minute timer.

Diamond Billiard Products Rail Facing Rubber Set is a genuine OEM replacement that is used on all Diamond Tables. Constructed with neoprene rubber, these rubber facings have a 60 Durometer rating. They are designed to offer optimal performance and longevity.

DID YOU KNOW ?

• Diamond utilizes 3/16" Neoprene rubber facing as a standard on all table models.
• If the factory pocket size of your Diamond table currently uses a 3/16" facing, it can be reduced by 1/4" by switching to a 5/16" facing without any modifications to the wood rail. This adjustment will reduce a pro-cut 4 1/2" pocket to a 4 1/4" size while keeping similar pocket playability!

Diamond Billiard Products 30-minute Timer switch is featured in every Diamond Ball Polisher. With the ability to set your desired time and walk away, this feature makes polishing easy and hassle-free. Ensure your polisher continues to function at its best with the genuine OEM replacement timer control designed for both the 8-ball and 16-ball Diamond Polishers. 

Diamond Billiard Products R9 Per Game Ball Drop Switch System is a genuine OEM replacement for the R9 Diamond Smart Table. This system provides reliable ball drop activation during each game, ensuring a seamless playing experience. 

Diamond Billiard Products Anti-Cheat Dual Microswitch Kit is specifically designed to enhance the functionality of Smart Tables manufactured between 2016 and 2018 that have the electronic ball drop system. The upgrade kit consists of the dual anti-cheat switch, cash box cover, and R9 coin mech bracket. By replacing the single action ball drop microswitch, this genuine OEM upgrade provides superior security and reliability. It is compatible with all new Diamond Smart tables.

PARTS INCLUDED:

• (1) Cash Box Top, 0S-CAS003
• (1) Capacitor, Wiring Harness, Both Microswitches, D10S509
• (1) Plastic Loop Clamp, 8876T52
• (1) Coin Mech Bracket, 0S-MP250-RIGHT
• (4) Wood Screws, #8 x 1-1/4
• (1) Wood Screw, #10 x 3/4
• (2) 10-32x1 Machine Screws
• (2) 10-32 Fiber Lock Nuts
• (2) Plastic Spacers, 94639A454

Partnering with one of America's top table installers, Glen Hancock, Diamond Billiards proudly presents the RKC250 Contact Cement. This specially formulated contact cement boasts superior strength and minimal odor, making it the preferred choice among professionals for installing billiard cloth and rail rubber. Its versatility extends beyond billiards, as it is also ideal for bonding leather, cork, felt, fabrics, and a variety of rubber compounds.

The RKC250 Contact Cement is sold in a box containing four individual gallon cans, providing ample supply for all your installation needs. With its strong bonding properties and minimal odor, this contact cement is sure to provide you with a superior installation experience. Whether you're a professional installer or a DIY enthusiast, the RKC250 Contact Cement is an essential addition to your toolkit.

Diamond Billiard Products Retro Fit Kit is a comprehensive solution designed to upgrade pre-2017 Diamond Smart Tables to the latest ball drop system. This system employs electronic technology to activate the ball drop, replacing the old mechanical cable system.

This kit includes the essential components required for the upgrade, such as the cash box cover, actuator motor and wire, timer circuit board, anti-cheat dual microswitches, single coin mechanism with R9 bracket, single coin door with locks, and the battery pack. All these parts are genuine OEM replacements used in new Diamond Smart Tables.

PARTS INCLUDED:

• (1) Cash Box Top, 0S-CAS003
• (1) Capacitor, Wiring Harness, Both Microswitches, D10S509
• (1) Plastic Loop Clamp, 8876T52
• (1) Coin Mech Bracket, 0S-MP250-RIGHT
• (4) Wood Screws, #6 x 1-1/4
• (1) Wood Screw, #10 x 3/4
• (2) 10-32x1 Machine Screws
• (2) 10-32 Fiber Lock Nuts
• (2) Plastic Spacers, 94639A454
• (1) R9 Timer Board, DTB209
• (2) Wood Screws, #6 x 1-1/4”
• (1) Battery Adapter Cable, BATADAPTCABLE
• (1) Actuator Cable, DPC709
• (1) Black Actuator, 330-010
• (2) Wood Screws, #6 x 1-3/4”
• (1) Bead Chain Splicing Link, 3606T41
• (1) Bead Chain w/ 28 Beads, 3606T91